New Product Release
2010-2022 Lexus GX460

PRO-TRUCK-LIFT | STAGE 1

Eibach PRO-TRUCK-LIFT combines a series of PRO-LIFT-KIT springs and PRO-TRUCK Sport shocks to create a perfectly tuned suspension system engineered for both, on and off-road performance. Each PRO-TRUCK-LIFT is designed and tested to deliver maximum ride height without compromising the integrity of factory bushings, ball joints and other components.

• Utilizes front PRO-LIFT-KIT Springs manufactured using race winning off-road spring technology
• Monotube design, 46mm pistons, Nitro coated rod and heavy-duty zinc coating
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide balanced ride quality, control and off-road capability
• Made by Eibach in the USA

Included:
2 - Front Eibach sport shocks
2 - Rear Eibach sport shocks
2 - Front Eibach lift springs
2 - Rear Eibach lift springs
All mounting hardware

PRO-TRUCK-LIFT | STAGE 2

The PRO-TRUCK-LIFT STAGE 2 System shares the same rear components (lift springs, sport shocks) as our STAGE 1 system with an upgrade in adjust ability up front. The front 2.0 coilovers were developed utilizing our extended-travel monotube design and variable force valving that delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles

• Utilizes ERO springs manufactured using race winning off-road spring technology
• Front coilovers allow adjustment of up to +3.7" on the GX460
• Pre-assembled for direct bolt-on installation
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Included:
2 - Billet aluminum top mount
2 - Polyurethane elastomer bump stops
2 - Front coilover threaded body shocks
2 - Front Eibach linear race springs
2 - Billet aluminum spring perches
2 - Rear Eibach lift springs
1 - 6mm adjustment spanner wrench
All Required Mounting Hardware

PRO-TRUCK COILOVER 2.0 | Front Coilovers

PRO-TRUCK COILOVER 2.0's were developed utilizing our extended-travel monotube design and variable force valving, Eibach PRO-TRUCK COILOVER 2.0 delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles.

• Utilizes ERO springs manufactured using race winning off-road spring technology
• Adjustable ride height allows adjustment of up to 3.7" of lift (depending on vehicle)
• Pre-assembled for direct bolt-on installation, out of the box height is set to match the rear height
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality
• Made by Eibach in the USA

Included:
2 - Front Eibach threaded body coilovers
2 - Threaded perches
2 - Top mount spring seats
2 - Front Eibach Race Springs
All mounting hardware

PRO-LIFT-KIT | PERFORMANCE LIFT SPRINGS

Eibach PRO-LIFT-KIT springs are designed to provide a suspension lift for your GX460 without the use of spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.

• Manufactured using race winning off-road race spring technology
• Developed to provide balanced ride quality, control, and off-road capability
• Sold in pairs
• Made by Eibach in the USA

Ride Height:
Front: + 1.0"
Rear: + 1.75"

Note: PRO-LIFT-KIT Springs must be used with Eibach PRO-TRUCK Sport shocks.

PRO-TRUCK | SPORT SHOCKS

Eibach PRO-TRUCK Sport shocks are built to tackle any road. For the GX460 we offer front ride height adjustable shocks that can lift up to +2.0" and rear shocks that accommodate up to a +2.0" lift. PRO-TRUCK Sport shocks are designed to maximize all available wheel travel for a smoother ride when the "Going Gets Tough"!

• Built to handle the extreme forces with more Off-Road performance in mind.
• Monotube Design, 46mm Pistons, Nitro-Coated Rods and Heavy Duty Zinc Coating
• Improved Handling & Stability—On or Off-Road
• Legendary Eibach Ride Quality
• Easy—Direct Replacement Installation

Ride Height:
Front Ride Height Adjustable: allows up to 2.0" of lift
Rear can accommodate: + 2.0" of lift

LOAD-LEVELING SYSTEM | Rear Height Adjuster

The Eibach LOAD-LEVELING System is designed to eliminate the need for air bags, spring spacers, or excessive spring rate to maintain ride height while carrying heavy loads. This system allows you to run the appropriate spring rate for your vehicle while maintaining a lift whether the vehicle is loaded or unloaded. This translates to improved ride quality and compliance, on and off-road while maintaining necessary tire and ground clearances. In addition, readily available Eibach Race Springs make this system adaptable as you continue to add modifications or weight to the vehicle.

• Available in 3 spring rate options ratings for 0, 200 and 400lbs of added weight.
• Eibach ERO compatible using our commonly found 3.75”ID Off-Road Race Springs
• 6061-T6 billet aluminum threaded spring seat for corrosion resistance and easy adjustment
• Hi-Durometer polyurethane spring seat isolator reduces NVH through axle
• Progressive polyurethane bump stop system improves control over large bumps
• Spring seat, bump-stop relocating adapters and hardware included for easy installation
• Made by Eibach in the USA