2024-2024 Ford Mustang GT Coupe 5.0L RWD S650 | Excludes vehicles w/ MagneRide Damping System Products

Comment: Excludes Models with Magnetic Ride Shocks. Tested with factory dampers.

Comment: Excludes Models with Magnetic Ride Shocks. Tested with factory dampers.

Comment: Front Sway Bar is Tubular and 3 Way-Adjustable/ Rear Sway Bar is Tubular and 3 Way-Adjustable.

Comment: Front Sway Bar is Tubular and 3 Way-Adjustable.

Comment: Rear Sway Bar is Tubular and 3 Way-Adjustable.

Comment: Camber Bolts 16mm. Front - Camber +/-1.75 degrees of adjustment. RSX & RSX S-Type start VIN2C003184.

Comment: 20mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. May not work with some OE wheels, or may require trimming of OE wheel studs for clearance

Comment: 20mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. May not work with some OE wheels, or may require trimming of OE wheel studs for clearance

Comment: 25mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: 25mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: 30mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: 30mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: 35mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: 35mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.