2004-2007 Subaru Impreza WRX Wagon Products

Comment: Tested with factory dampers.

Comment: Camber Arm. Rear - Camber +/-1.5, Toe +/-1.5 degrees of adjustment.

Comment: Camber Bolts 14mm. Front - Camber +/- 1.75 degrees of adjustment.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: The centering of the wheel is only possible with the wheelbolts! Therefore, it may be necessary to do wheel balancing on the car - to avoid possible vibration.

Comment: Mazda / Nissan / Subaru have various wheel studs that are dependant on the model, axle or year manufactured. Before ordering, please check the knurl diameter of the original wheel studs on both axles. In our kits, we include wheel studs with a knurl diameter of 14.9mm (14.3mm for Subaru). Other Knurl diameter sizes need to be indicated when ordering! Original studs must be changed. Longer studs are included.