1994-2004 Ford Mustang Coupe 6 Cyl. SN95 Products
13 Products
![Eibach 3518.140 product image](/storage/img/products/tn/eibach-3518140-mustang-1.jpg)
PRO-KIT
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
1.5 in Front
|
1.5 in Rear
Part #: 3518.140
Set of 4 Springs
Comment: Tested with factory dampers.
In Stock
$315.00 $350.00
![Eibach 3518.320 product image](/storage/img/products/tn/eibach-3518320-mustang-1.jpg)
ANTI-ROLL-KIT Front and Rear
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
35mm Front
|
25mm Rear
Part #: 3518.320
Front & Rear Sway Bar Kits
Comment: Front Sway Bar is Tubular and Non-Adjustable/ Rear Sway Bar is Solid and Non-Adjustable.
In Stock
$504.00 $560.00
![Eibach 3518.310 product image](/storage/img/products/tn/eibach-3518310-mustang-1.jpg)
ANTI-ROLL-KIT Front
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
35mm Front
Part #: 3518.310
Front Sway Bar Kit Only
Comment: Front Sway Bar is Tubular and Non-Adjustable.
In Stock
$269.10 $299.00
![Eibach 3510.312 product image](/storage/img/products/tn/eibach-3510312-mustang-1.jpg)
ANTI-ROLL-KIT Rear
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
25mm Rear
Part #: 3510.312
Rear Sway Bar Kit Only
Comment: Rear Sway Bar is Solid and Non-Adjustable.
In Stock
$229.50 $255.00
![Eibach 3518.880 product image](/storage/img/products/tn/eibach-pro-plus.jpg)
PRO-PLUS KIT
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
1.5 in Front
|
1.5 in Rear
Part #: 3518.880
Pro-Kit Springs + Front & Rear Sway Bars
In Stock
$819.00 $910.00
![Eibach 5.81280K product image](/storage/img/products/tn/eibach-pro-alignment-bolts.jpg)
PRO-ALIGNMENT Kit
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
Part #: 5.81280K
Camber Bolt Kit
Comment: Camber Bolts 16mm. Front - Camber +/-1.75 degrees of adjustment. RSX & RSX S-Type start VIN2C003184.
In Stock
$27.90 $31.00
![Eibach S90-1-05-038 product image](/storage/img/products/tn/eibach-S90105012.jpg)
PRO-SPACER
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
Part #: S90-1-05-038
5mm Pair
Comment: Wheel Bolts and Wheel Studs sold separately. Does not fit GT350
In Stock
$92.70 $103.00
![Eibach S90-4-25-010 product image](/storage/img/products/tn/eibach_S90425010_1.jpg)
PRO-SPACER
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
Part #: S90-4-25-010
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$174.60 $194.00
![Eibach S90-4-30-005 product image](/storage/img/products/tn/eibach-s90445001-1.jpg)
PRO-SPACER
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
Part #: S90-4-30-005
30mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$189.90 $211.00
![Eibach S90-4-35-001 product image](/storage/img/products/tn/eibach-s90445001-1.jpg)
PRO-SPACER
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
Part #: S90-4-35-001
35mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$227.70 $253.00
![Eibach S90-4-45-001 product image](/storage/img/products/tn/eibach-s90445001-1.jpg)
PRO-SPACER
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
Part #: S90-4-45-001
45mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$92.70 $103.00
![Eibach R-S90-4-25-010 product image](/storage/img/products/tn/eibach_S90425010_1.jpg)
PRO-SPACER
1994-2004 Ford Mustang Coupe 6 Cyl. SN95
Part #: R-S90-4-25-010
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Factory Refurbished
$137.93 $194.00