New Product Release
2019-2020 Toyota 4Runner TRD PRO

PRO-LIFT-KIT

Eibach PRO-LIFT-KIT Springs are designed to provide a suspension lift on your FOX equipped 4Runner TRD Pro while retaining the factory look and feel. Rigorous development and testing has resulted in a lift spring system which perfectly accommodates the factory FOX shocks in the TRD Pro. By optimizing height and rate within the limit of each shocks’ bypass zone, you retain factory ride characteristics and a lift ready to tackle the toughest terrain.

Each PRO-LIFT-KIT is engineered and manufactured using the same technology found in our championship winning ERO Off-road race springs and carefully tested to provide unparalleled ride quality and off-road capability.

Note: Front lift springs do not fit vehicles with TSB #0094-20 update, confirm vehicle has flat ground spring ends. TSB update compatible kit (E30-82-071-04-22) COMING SOON!

Load-Leveling System

Developed for vehicles equipped with solid-axle coil spring suspension, the Eibach Load-Leveling-System uses a combination of readily available Eibach Race Springs, adjustable threaded spring seat and bump stops to allow fine tuning of load capacity and ride height. Engineered and tested for each application, the Load-Leveling-System is available in three different load ranges to achieve up to 2.0" of lift for maximum travel and tire clearance off-road.

• Available in 3 load ratings: 0-200 lbs. / 200-400 lbs. / 400+ lbs.
• Eibach ERO compatible using our commonly found 3.75”ID Off-Road Race Springs
• 6061-T6 billet aluminum threaded spring seat for corrosion resistance and easy adjustment
• Hi-Durometer polyurethane spring seat isolator reduces NVH through axle
• Progressive polyurethane bump stop system improves control over large bumps
• Spring seat, bump-stop relocating adapters and hardware included for easy installation
• Made by Eibach in the USA

The Eibach Load-Leveling-System is designed to eliminate the need for air bags, spring spacers, or excessive spring rate to maintain ride height while carrying heavy loads. This system allows you to run the appropriate spring rate for your vehicle while maintaining a lift whether the vehicle is loaded or unloaded. This translates to improved ride quality and compliance, on and off-road while maintaining necessary tire and ground clearances. In addition, readily available Eibach Race Springs make this system adaptable as you continue to add modifications or weight to the vehicle. Each load range had been tested to deliver up to 2.0" of rear lift while still working within range of the Eibach PRO-TRUCK Shocks.

The Eibach LOAD-LEVELING-System is optimal for vehicles which are frequently loaded and unloaded for towing, camping trips, or overland expeditions. Armor, roof-top tents, storage shelving, full size spares and tire carriers increase weight ultimately effecting static ride height of your vehicle. The addition of the height adjustable perch allows fine tuning of rear ride heights, keeping your chassis clear from the trail, and tires clear from fenders.