2022-2024 Honda Civic Si Sedan 1.5L Turbo FWD FE Products

Comment: Tested with factory dampers. Rear Camber Kit part# 5.67476K is required for proper alignment.

Comment: Front Sway Bar is Tubular and 3 Way-Adjustable Rear Sway Bar is Tubular and 2 Way-Adjustable.

Comment: Front Sway Bar is Tubular and 3 Way-Adjustable.

Comment: Rear Sway Bar is Tubular and 2 Way-Adjustable.

Comment: Camber Arm. Rear - Camber +3.0 to -3.0 degrees of Adjustments.

Comment: 15mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64mm Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 26.25mm) minus spacer-thickness (i.e. 15mm) = 11.25mm excess stud length. The cut-out should have a depth of 12mm.

Comment: 20mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 26.25mm) minus spacer-thickness (i.e. 20mm) = 6.25mm excess stud length. The cut-out should have a depth of 7mm.

Comment: 25mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 26.25mm) minus spacer-thickness (i.e. 25mm) = 1.25mm excess stud length. The cut-out should have a depth of 2mm.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.