2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE Products

8 Products

Eibach E10-23-036-01-22 product image

Special Edition PRO-KIT
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
0.8" Front | 0.8" Rear
Part #: E10-23-036-01-22
Comment: Ride height can be adjusted using the OE threaded body w/ exception to front nose lift vehicles.
Out of stock
$399.00
Call for ETA
Eibach E40-23-036-01-11 product image

ANTI-ROLL-KIT Front and Rear
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
32mm Front | 32mm Rear
Part #: E40-23-036-01-11
In Stock
$588.00
Eibach E40-23-036-01-10 product image

ANTI-ROLL-KIT Front
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
32mm Front
Part #: E40-23-036-01-10
In Stock
$299.00
Eibach E40-23-036-01-01 product image

ANTI-ROLL-KIT Rear
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
32mm Rear
Part #: E40-23-036-01-01
In Stock
$289.00
Eibach AK41-23-036-01-20 product image

End Link Kit
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
Part #: AK41-23-036-01-20
In Stock
$179.00
Eibach AK41-23-036-01-02 product image

End Link Kit
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
Part #: AK41-23-036-01-02
In Stock
$299.00
Eibach S90-4-15-025-B product image

PRO-SPACER
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
Part #: S90-4-15-025-B
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. May not work with some OE wheels, or may require trimming of OE wheel studs for clearance 15mm Spacer / Bolt Pattern 5x120 / Hub Center 66.9
Out of stock
$225.00
Call for ETA
Eibach S90-4-20-032-B product image

PRO-SPACER
2020-2024 Chevrolet Corvette Coupe 6.2L V8 RWD C8 | Z51, NO NOSE LIFT, W/ MAGNERIDE
Part #: S90-4-20-032-B
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. May not work with some OE wheels, or may require trimming of OE wheel studs for clearance 20mm Spacer / Bolt Pattern 5x120 / Hub Center 66.9
Out of stock
$245.00
Call for ETA