2018-2023 Kia Stinger GT 3.3L AWD Products

Comment: Tested with factory dampers.

Comment: Front Sway Bar is Tubular and 2 Way-Adjustable/

Comment: Front Sway Bar is Tubular and 2 Way-Adjustable.

Comment: Rear Sway Bar is Solid and 2 Way-Adjustable.

Comment: Front Sway Bar is Tubular and 2 Way-Adjustable/

Comment: When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible. Do not use with vehicles equipped with steel wheels!

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: Mazda / Nissan / Subaru have various wheel studs that are dependant on the model, axle or year manufactured. Before ordering, please check the knurl diameter of the original wheel studs on both axles. In our kits, we include wheel studs with a knurl diameter of 14.9mm (14.3mm for Subaru). Other Knurl diameter sizes need to be indicated when ordering! Original studs must be changed. Longer studs are included.

Comment: Mazda / Nissan / Subaru have various wheel studs that are dependant on the model, axle or year manufactured. Before ordering, please check the knurl diameter of the original wheel studs on both axles. In our kits, we include wheel studs with a knurl diameter of 14.9mm (14.3mm for Subaru). Other Knurl diameter sizes need to be indicated when ordering! Original studs must be changed. Longer studs are included.