2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2 Products

7 Products

Eibach E10-51-019-01-22 product image

PRO-KIT
2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2
0.6 in Front | 1.7 in Rear
Part #: E10-51-019-01-22
Set of 4 Springs
Comment: Tested with factory dampers.
In Stock
$375.00
Eibach E40-51-022-01-01 product image

ANTI-ROLL-KIT Rear
2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2
35mm Rear
Part #: E40-51-022-01-01
Rear Sway Bar Kit Only
Comment: Rear Sway Bar is Tubular and Non-Adjustable.
In Stock
$295.00
Eibach 5.82362K product image

PRO-ALIGNMENT Kit
2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2
Part #: 5.82362K
Camber Plate/Nut Kit
Comment: +/-1.5 Degrees of Camber
Out of stock
$39.00
Call for ETA
Eibach AC41-51-022-01-02 product image

PRO-ALIGNMENT Kit
2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2
-1.5/+2.0deg Rear
Part #: AC41-51-022-01-02
Camber Arm Kit
In Stock
$499.00
Eibach S90-4-20-042 product image

PRO-SPACER
2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2
Part #: S90-4-20-042
20mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock - Limited Stock Remaining!
$185.00
Eibach S90-4-25-061 product image

PRO-SPACER
2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2
Part #: S90-4-25-061
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock - Limited Stock Remaining!
$195.00
Eibach S90-4-30-055 product image

PRO-SPACER
2018-2021 Jeep Grand Cherokee SRT SUV 6.4L V8 HEMI AWD WK2
Part #: S90-4-30-055
30mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock - Limited Stock Remaining!
$205.00