2017-2024 Tesla Model 3 Long Range AWD Products

Comment: Tested with factory dampers.

Comment: Front Sway Bar is Tubular and 3 Way-Adjustable Rear Sway Bar is Tubular and 2 Way-Adjustable.

Comment: Front Sway Bar is Tubular and 3 Way-Adjustable.

Comment: Rear Sway Bar is Tubular and 2 Way-Adjustable.

Comment: Replaces Factory End Links.

Comment: Replaces Factory End Links.

Comment: Front Sway Bar is Tubular and 3 Way-Adjustable Rear Sway Bar is Tubular and 2 Way-Adjustable.

Comment: Kit includes lug nuts with an extended shank and a 60 degree taper 14mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64

Comment: Kit includes lug nuts with an extended shank and a 60 degree taper 14mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64

Comment: 10mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64 Kit includes lug nuts with an extended shank and a 60 degree taper

Comment: 10mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64 Kit includes lug nuts with an extended shank and a 60 degree taper

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. 30mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. 30mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. 25mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. 25mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64

Comment: 20mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. 20mm Spacer / Bolt Pattern 5x114.3 / Hub Center 64

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.