2017-2022 Infiniti Q60 Red Sport Coupe 3.0L RWD Products
5 Products

PRO-KIT
2017-2022 Infiniti Q60 Red Sport Coupe 3.0L RWD
0.3 in Front
|
1.1 in Rear
Part #: E10-44-003-01-22
Set of 4 Springs
Comment: Front Camber Kit part# 5.72130K must be used to get vehicle back to factory alignment. Tested with factory dampers.
In Stock
$355.00

PRO-ALIGNMENT Kit
2017-2022 Infiniti Q60 Red Sport Coupe 3.0L RWD
Part #: 5.72130K
Camber Arm Kit
Comment: Camber/Caster Control Arm - Front Camber +/-2.5, Caster +/-1.0 degrees of adjustment.
In Stock - Limited Stock Remaining!
$553.00

PRO-SPACER
2017-2022 Infiniti Q60 Red Sport Coupe 3.0L RWD
Part #: S90-4-15-001
15mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$182.00

PRO-SPACER
2017-2022 Infiniti Q60 Red Sport Coupe 3.0L RWD
Part #: S90-4-20-003
20mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$195.00

PRO-SPACER
2017-2022 Infiniti Q60 Red Sport Coupe 3.0L RWD
Part #: S90-4-25-019
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$205.00