2016-2023 Infiniti Q50 Base Sedan 3.0L RWD Products

5 Products

Eibach E10-44-003-01-22 product image

PRO-KIT
2016-2023 Infiniti Q50 Base Sedan 3.0L RWD
0.6 in Front | 1.4 in Rear
Part #: E10-44-003-01-22
Set of 4 Springs
Comment: Front Camber Kit part# 5.72130K must be used to get vehicle back to factory alignment. Tested with factory dampers.
In Stock
$350.00
Eibach 5.72130K product image

PRO-ALIGNMENT Kit
2016-2023 Infiniti Q50 Base Sedan 3.0L RWD
Part #: 5.72130K
Camber Arm Kit
Comment: Camber/Caster Control Arm - Front Camber +/-2.5, Caster +/-1.0 degrees of adjustment.
In Stock - Limited Stock Remaining!
$553.00
Eibach S90-4-15-001 product image

PRO-SPACER
2016-2023 Infiniti Q50 Base Sedan 3.0L RWD
Part #: S90-4-15-001
15mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$173.00
Eibach S90-4-20-003 product image

PRO-SPACER
2016-2023 Infiniti Q50 Base Sedan 3.0L RWD
Part #: S90-4-20-003
20mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$185.00
Eibach S90-4-25-019 product image

PRO-SPACER
2016-2023 Infiniti Q50 Base Sedan 3.0L RWD
Part #: S90-4-25-019
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$194.00