2013-2015 Chevrolet Camaro ZL1 Convertible Products

6 Products

Eibach 38144.140 product image

PRO-KIT
2013-2015 Chevrolet Camaro ZL1 Convertible
0.6 in Front | 0.7 in Rear
Part #: 38144.140
Set of 4 Springs
Comment: Tested with factory dampers (including magnetic ride)
In Stock
$350.00
Eibach 5.81280K product image

PRO-ALIGNMENT Kit
2013-2015 Chevrolet Camaro ZL1 Convertible
Part #: 5.81280K
Camber Bolt Kit
Comment: Camber Bolts 16mm. Front - Camber +/-1.75 degrees of adjustment. RSX & RSX S-Type start VIN2C003184.
Out of stock
$31.00
ETA Aug 2, 2024
Eibach S90-4-15-027 product image

PRO-SPACER
2013-2015 Chevrolet Camaro ZL1 Convertible
Part #: S90-4-15-027
15mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$182.00
Eibach S90-4-20-035 product image

PRO-SPACER
2013-2015 Chevrolet Camaro ZL1 Convertible
Part #: S90-4-20-035
20mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$191.00
Eibach S90-4-25-051 product image

PRO-SPACER
2013-2015 Chevrolet Camaro ZL1 Convertible
Part #: S90-4-25-051
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$205.00
Eibach S90-4-30-044 product image

PRO-SPACER
2013-2015 Chevrolet Camaro ZL1 Convertible
Part #: S90-4-30-044
30mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$211.00