2011-2015 Chevrolet Cruze 1.4L Turbo Products

6 Products

Eibach 38149.140 product image

PRO-KIT
2011-2015 Chevrolet Cruze 1.4L Turbo
1.2 in Front | 1.2 in Rear
Part #: 38149.140
Set of 4 Springs
Comment: Tested with factory dampers.
In Stock
$350.00
Eibach S90-4-15-028 product image

PRO-SPACER
2011-2015 Chevrolet Cruze 1.4L Turbo
Part #: S90-4-15-028
15mm Pair
Comment: 15mm Spacer / Bolt Pattern 5x105 / Hub Center 56.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. May not work with some OE wheels, or may require trimming of OE wheel studs for clearance
In Stock
$173.00
Eibach S90-4-20-036 product image

PRO-SPACER
2011-2015 Chevrolet Cruze 1.4L Turbo
Part #: S90-4-20-036
20mm Pair
Comment: 20mm Spacer / Bolt Pattern 5x105 / Hub Center 56.5 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. May not work with some OE wheels, or may require trimming of OE wheel studs for clearance
In Stock
$185.00
Eibach S90-4-25-052 product image

PRO-SPACER
2011-2015 Chevrolet Cruze 1.4L Turbo
Part #: S90-4-25-052
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. 25mm Spacer / Bolt Pattern 5x105 / Hub Center 56.5 May not work with some OE wheels, or may require trimming of OE wheel studs for clearance
In Stock
$194.00
Eibach S90-4-30-045 product image

PRO-SPACER
2011-2015 Chevrolet Cruze 1.4L Turbo
Part #: S90-4-30-045
30mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. 30mm Spacer / Bolt Pattern 5x105 / Hub Center 56.5 May not work with some OE wheels, or may require trimming of OE wheel studs for clearance
In Stock - Limited Stock Remaining!
$211.00