2010-2013 Mazda 3 Mazdaspeed Products

8 Products

Eibach 5554.140 product image

PRO-KIT
2010-2013 Mazda 3 Mazdaspeed
1.0 in Front | 0.6 in Rear
Part #: 5554.140
Comment: Tested with factory dampers.
In Stock
$350.00
Eibach 5.67420K product image

PRO-ALIGNMENT Kit
2010-2013 Mazda 3 Mazdaspeed
Part #: 5.67420K
Comment: Camber Arm. Rear - Camber +5.0 to -1.5 degrees of adjustment.
In Stock
$268.00
Eibach S90-4-15-002 product image

PRO-SPACER
2010-2013 Mazda 3 Mazdaspeed
Part #: S90-4-15-002
Comment: When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible. Do not use with vehicles equipped with steel wheels!
In Stock
$173.00
Eibach S90-4-20-001 product image

PRO-SPACER
2010-2013 Mazda 3 Mazdaspeed
Part #: S90-4-20-001
Comment: When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible. Do not use with vehicles equipped with steel wheels!
In Stock
$185.00
Eibach S90-4-25-016 product image

PRO-SPACER
2010-2013 Mazda 3 Mazdaspeed
Part #: S90-4-25-016
Comment: When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible. Do not use with vehicles equipped with steel wheels!
In Stock
$194.00
Eibach S90-4-30-015 product image

PRO-SPACER
2010-2013 Mazda 3 Mazdaspeed
Part #: S90-4-30-015
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock - Limited Stock Remaining!
$211.00
Eibach S90-6-10-005 product image

PRO-SPACER
2010-2013 Mazda 3 Mazdaspeed
Part #: S90-6-10-005
Comment: Original studs must be changed. Longer studs are included. Mazda / Nissan / Subaru have various wheel studs that are dependent on the model, axle or year manufactured. Before ordering, please check the knurl diameter of the original wheel studs on both axles. In our kits, we include wheel studs with a knurl diameter of 13mm.
In Stock
$152.00
Eibach S90-6-15-027 product image

PRO-SPACER
2010-2013 Mazda 3 Mazdaspeed
Part #: S90-6-15-027
Comment: Original studs must be changed. Longer studs are included. Mazda / Nissan / Subaru have various wheel studs that are dependent on the model, axle or year manufactured. Before ordering, please check the knurl diameter of the original wheel studs on both axles. In our kits, we include wheel studs with a knurl diameter of 13mm.
In Stock
$158.00