2007-2009 Mazda 3 Mazdaspeed Products

8 Products

Eibach 5549.140 product image

PRO-KIT

2007-2009 Mazda 3 Mazdaspeed
0.8 in Front | 0.7 in Rear
Part #: 5549.140
Set of 4 Springs
Comment: Tested with factory dampers.
In Stock
$350.00
Eibach 5.67420K product image

PRO-ALIGNMENT Kit

2007-2009 Mazda 3 Mazdaspeed
Part #: 5.67420K
Camber Arm Kit
Comment: Camber Arm. Rear - Camber +5.0 to -1.5 degrees of adjustment.
In Stock
$268.00
Eibach S90-4-15-002 product image

PRO-SPACER

2007-2009 Mazda 3 Mazdaspeed
Part #: S90-4-15-002
15mm Pair
Comment: When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible. Do not use with vehicles equipped with steel wheels!
In Stock
$173.00
Eibach S90-4-20-001 product image

PRO-SPACER

2007-2009 Mazda 3 Mazdaspeed
Part #: S90-4-20-001
20mm Pair
Comment: When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible. Do not use with vehicles equipped with steel wheels!
In Stock
$185.00
Eibach S90-4-25-016 product image

PRO-SPACER

2007-2009 Mazda 3 Mazdaspeed
Part #: S90-4-25-016
25mm Pair
Comment: When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts, (when using 20mm spacers, 9mm minimum cut-out, when using 25mm spacers 4mm minimum cut-outs). If this isn't the case, shorter bolts must be used. (System 5, 6). Otherwise the use of this spacers is not possible. Do not use with vehicles equipped with steel wheels!
In Stock
$194.00
Eibach S90-5-05-031 product image

PRO-SPACER

2007-2009 Mazda 3 Mazdaspeed
Part #: S90-5-05-031
5mm Pair
Comment: The centering of the wheel is only possible with the wheelbolts! Therefore, it may be necessary to do wheel balancing on the car - to avoid possible vibration.
In Stock
$109.00
Eibach S90-6-10-005 product image

PRO-SPACER

2007-2009 Mazda 3 Mazdaspeed
Part #: S90-6-10-005
10mm Pair
Comment: Original studs must be changed. Longer studs are included. Mazda / Nissan / Subaru have various wheel studs that are dependent on the model, axle or year manufactured. Before ordering, please check the knurl diameter of the original wheel studs on both axles. In our kits, we include wheel studs with a knurl diameter of 13mm.
In Stock
$152.00
Eibach S90-6-15-027 product image

PRO-SPACER

2007-2009 Mazda 3 Mazdaspeed
Part #: S90-6-15-027
15mm Pair
Comment: Original studs must be changed. Longer studs are included. Mazda / Nissan / Subaru have various wheel studs that are dependent on the model, axle or year manufactured. Before ordering, please check the knurl diameter of the original wheel studs on both axles. In our kits, we include wheel studs with a knurl diameter of 13mm.
In Stock
$158.00