2007-2018 Jeep Wrangler 2-Door 4WD JK Products

Comment: Includes Pro-Truck Lift Springs and Pro-Truck Sport Shocks. Requires Track Bar, Bump Stop Spacers, Extended Brake Lines, Extended End-Link-System for installation. Model years 2012 + Require Exhaust Cross Over.

Comment: Includes front leveling springs and extended front end links.

Comment: Can accommodate lifted suspensions between 0-2"

Comment: Only to be used with lifted suspensions between 2-3"

Comment: Can accommodate lifted suspensions between 0-2"

Comment: Only to be used with lifted suspensions between 2-3"

Comment: Front Upper Arm - Adjustment Range: Caster/Pinion +3.0 Degrees.

Comment: FRONT LOWER ARM- Tubular OE Length w/ Spherical Bushing

Comment: REAR LOWER ARM-Tubular OE Length w/ Spherical Bushing

Comment: Camber Shim- FRONT-Adjustment Range: +.5 DEG

Comment: Camber Shim-FRONT-Adjustment Range: +1.0 DEG

Comment: Caster/Pinion Bolt FRONT- Adj. Range: 1.5 DEG / 1.5 DEG

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Not for use with some US-wheels, as these do not have the necessary cut outs.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Not for use with some US-wheels, as these do not have the necessary cut outs.

Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Not for use with some US-wheels, as these do not have the necessary cut outs.