2007-2008 Infiniti G35 X Sedan AWD Products

7 Products

Eibach 6399.140 product image

PRO-KIT
2007-2008 Infiniti G35 X Sedan AWD
1.4 in Front | 1.1 in Rear
Part #: 6399.140
Set of 4 Springs
Comment: Tested with factory dampers.
In Stock
$350.00
5.00 of 5 (1 reviews)
Eibach 5.72130K product image

PRO-ALIGNMENT Kit
2007-2008 Infiniti G35 X Sedan AWD
Part #: 5.72130K
Camber Arm Kit
Comment: Camber/Caster Control Arm - Front Camber +/-2.5, Caster +/-1.0 degrees of adjustment.
In Stock - Limited Stock Remaining!
$553.00
Eibach 5.72260K product image

PRO-ALIGNMENT Kit
2007-2008 Infiniti G35 X Sedan AWD
Part #: 5.72260K
Camber Arm Kit
Comment: Camber Arm. Rear - Camber +/-4.0, Toe +/-3.0 degrees of adjustment.
In Stock
$249.00
Eibach 5.72265K product image

PRO-ALIGNMENT Kit
2007-2008 Infiniti G35 X Sedan AWD
Part #: 5.72265K
Camber Bolt Kit
Comment: Camber Bolt Kit. Rear - Camber +/-3.0, Toe +/-3.0 degrees of adjustment.
In Stock
$80.00
Eibach S90-4-15-001 product image

PRO-SPACER
2007-2008 Infiniti G35 X Sedan AWD
Part #: S90-4-15-001
15mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$173.00
Eibach S90-4-20-003 product image

PRO-SPACER
2007-2008 Infiniti G35 X Sedan AWD
Part #: S90-4-20-003
20mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$185.00
Eibach S90-4-25-019 product image

PRO-SPACER
2007-2008 Infiniti G35 X Sedan AWD
Part #: S90-4-25-019
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
In Stock
$194.00