New Product Release
2016-2022 Toyota Tacoma

PRO-TRUCK-LIFT Stage 1 | Performance Lift System

Eibach PRO-TRUCK-LIFT STAGE 1 combines a series of PRO-LIFT-KIT springs and PRO-TRUCK Sport shocks to create a perfectly tuned suspension system engineered for both, on and off-road performance. Each PRO-TRUCK-LIFT is designed and tested to deliver maximum ride height without compromising the integrity of factory bushings, ball joints and other components.

• Utilizes front PRO-LIFT-KIT Springs manufactured using race winning off-road spring technology
• Monotube design, 46mm pistons, Nitro coated rod and heavy-duty zinc coating
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide balanced ride quality, control and off-road capability
• Made by Eibach in the USA

Included:
2 - Front Eibach sport shocks
2 - Rear Eibach sport shocks
2 - Front Eibach lift springs
2 - Spring perches
All mounting hardware

PRO-TRUCK-LIFT Stage 2 | Coilover Lift System

Developed for the trail, the Eibach PRO-TRUCK-LIFT STAGE 2 System is made to handle the toughest terrain. Combining the adjustability of our PRO-TRUCK Coilover 2.0's up front and the consistent performance of our PRO-TRUCK Sport Shocks out back. The STAGE 2 System delivers superb damping control and comfort no matter what you throw at it.

• Front coilovers allow adjustment of up to +2.5" on the Tacoma
• Pre-assembled for direct bolt-on installation, out of the box height is set to match the rear height
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Included:
2 - Billet aluminum top mount
2 - Front coilover threaded body shocks
2 - Front Eibach linear race springs
2 - Rear Sport shocks
2 - Billet aluminum spring perches
1 - Stabilizer bar relocation kit
1 - 6mm adjustment spanner wrench
All required mounting hardware

PRO-TRUCK-LIFT Coilover 2.0 | Front Coilovers

PRO-TRUCK COILOVER 2.0's were developed utilizing our extended-travel monotube design and variable force valving, Eibach PRO-TRUCK COILOVER 2.0 delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles.

• Adjustable ride height allows lift of up to 2.5"
• Stabilizer relocation kit included
• Pre-assembled for direct bolt-on installation, out of the box height is set to match the rear height
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Included:
2 - Billet aluminum top mount
2 - Front coilover threaded body shocks
2 - Front Eibach linear race springs
2 - Billet aluminum spring perches
1 - 6mm adjustment spanner wrench
All required mounting hardware

PRO-LIFT-KIT | Performance Lift Springs

Eibach PRO-LIFT-KIT springs are designed to provide a suspension lift for your Tacoma without the use of spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.

Each PRO-LIFT-KIT is engineered and manufactured using the same technology found in our championship winning ERO Off-road race springs and carefully tested to provide unparalleled ride quality and off-road capability.

• Manufactured using race winning off-road race spring technology
• Developed to provide balanced ride quality, control, and off-road capability
• Sold in pairs
• Made by Eibach in the USA

Ride Height:
Front: + 2.0"

Note: PRO-LIFT-KIT Springs must be used with Eibach PRO-TRUCK Sport shocks

PRO-TRUCK | Sport Shocks

Eibach PRO-TRUCK Sport shocks are built to tackle any road. For the Tacoma we offer front ride height adjustable shocks that lift up to +2.0" (when using factory springs) and rear shocks that accommodate up to a +1.5" lift. PRO-TRUCK Sport shocks are designed to maximize all available wheel travel for a smoother ride when the "Going Gets Tough"!

• Built to handle the extreme forces with more Off-Road performance in mind.
• Monotube Design, 46mm Pistons, Nitro-Coated Rods and Heavy Duty Zinc Coating
• Improved Handling & Stability—On or Off-Road
• Legendary Eibach Ride Quality
• Easy—Direct Replacement Installation

PRO-TRUCK | Reservoir Shocks

Eibach PRO-TRUCK Reservoir Shocks are the newest addition to Eibach’s selection of off-road performance dampers. From hardened nitro-steel piston rods, to 46mm monotube construction, each PRO-TRUCK Reservoir Shock features the same quality components found in the PRO-TRUCK Coilover and PRO-TRUCK Sport Shocks. Equipped with a piggyback remote reservoir system, the PRO-TRUCK Reservoir Shock features increased fluid capacity, allowing for more controlled pressures under severe abuse. This translates to more consistent damping forces on extended runs, or with heavy loads over rough terrain.

Each PRO-TRUCK Reservoir Shock’s damping characteristics are carefully matched to work in conjunction with Eibach coilover systems, providing the perfect balance of control and ride quality off-road.

• Increased high speed damping performance for more control through G outs and varying terrain
• Monotube design for maximum piston surface area and increased response
• Extended travel accommodates rear lift systems
• Hardened Nitro-Steel Piston Shaft for Maximum Abrasion Resistance and Durability
• Filled with MAXIMA ® performance shock oil
• Nitrogen charged for cavitation resistance and consistent performance
• Includes billet aluminum bracket and mounts and fittings
• Each shock is dyno tested for performance and consistency
• Million Mile, Limited Lifetime Warranty

PRO-TRUCK | REAR-LIFT-BLOCK

Eibach PRO-TRUCK Rear Lift Blocks are engineered for additional ground clearance while also helping distribute the weight of your cargo and improve towing performance. Our 1.0” and 1.5" Rear Lift Blocks can be paired with our rear PRO-TRUCK Sport shocks which accommodate up to 1.5” (depending on application).

• Available in 1.0" and 1.5" Billet aluminum black anodized blocks
• Includes u bolts and hardware
• Zinc coated hardware to prevent rust
• Sold as a pair
• Made in the USA