Eibach - 2005-2015 Toyota Tacoma

PRO-TRUCK-LIFT Coilover 2.0 | Front Coilover

Now in stock for the 2005-2015 Tacoma 4WD, PRO-TRUCK COILOVER 2.0's were developed utilizing our extended-travel monotube design and variable force valving, Eibach PRO-TRUCK COILOVER 2.0 delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles.

• Utilizes ERO springs manufactured using race winning off-road spring technology
• Adjustable ride height allows adjustment of up to 2.7"
• Pre-assembled for direct bolt-on installation, out of the box height is set to match the rear height
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Ride Height:
Front: 0.7" - +2.7"

Included:

• 2 - Front coilover threaded body shocks
• 2 - Front silver Eibach Race Springs
• 2 - Top mount spring seats
• 2 - Threaded perches
• 1 - 6mm adjustment tool
• All mounting hardware

PRO-TRUCK-LIFT STAGE 1 | Performance Lift System

Eibach PRO-TRUCK-LIFT STAGE 1 combines a series of PRO-LIFT-KIT springs and PRO-TRUCK Sport shocks to create a perfectly tuned suspension system engineered for both, on and off-road performance. Each PRO-TRUCK-LIFT is designed and tested to deliver maximum ride height without compromising the integrity of factory bushings, ball joints and other components.

• Utilizes front PRO-LIFT-KIT Springs manufactured using race winning off-road spring technology
• Monotube design, 46mm pistons, Nitro coated rod and heavy-duty zinc coating
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide balanced ride quality, control and off-road capability
• Made by Eibach in the USA

Ride Height:
Front: +2.5" Rear: can accommodate up to +1.5" of lift

Included:

• 2 - Front Eibach sport shocks
• 2 - Rear Eibach sport shocks
• 2 - Front Eibach lift springs
• All mounting hardware

PRO-TRUCK-LIFT STAGE 2 | Coilover Lift System

The PRO-TRUCK-LIFT STAGE 2 System shares the same rear components (lift springs, sport shocks, air bag delete) as our STAGE 1 system with an upgrade in adjust ability up front. The front 2.0 coilovers were developed utilizing our extended-travel mono tube design and variable force valving that delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles.

• Utilizes ERO springs manufactured using race winning off-road spring technology
• Front coilovers allow adjustment of up to +2.7" on the Tacoma
• Pre-assembled for direct bolt-on installation, out of the box height is set to match the rear height
• Rear easy to install air bag delete
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Ride Height:
Front: +0.7 - 2.7" Rear: Can accommodate up to 1.5" of lift

Included:

• 2 - Billet aluminum top mount
• 2 - Polyurethane elastomer bump stops
• 2 - Front coilover threaded body shocks
• 2 - Front Eibach linear race springs
• 2 - Billet aluminum spring perches
• 1 - 6mm adjustment spanner wrench
• All Required Mounting Hardware

PRO-LIFT-KIT | Performance Lift Springs

Eibach PRO-LIFT-KIT springs are designed to provide a suspension lift for your Tacoma without the use of spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.

Each PRO-LIFT-KIT is engineered and manufactured using the same technology found in our championship winning ERO Off-road race springs and carefully tested to provide unparalleled ride quality and off-road capability.

• Manufactured using race winning off-road race spring technology
• Developed to provide balanced ride quality, control, and off-road capability
• Sold in pairs
• Made by Eibach in the USA

Ride Height:
Front: + 2.5"

Note: PRO-LIFT-KIT Springs must be used with Eibach PRO-TRUCK Sport shocks.

PRO-TRUCK Sport | Performance Sport Shocks

Eibach PRO-TRUCK Sport shocks are built to tackle any road. For the Tacoma we offer front ride height adjustable shocks that lift up to +2.5" (when using factory springs) and rear shocks that accommodate up to a +1.5" lift. PRO-TRUCK Sport shocks are designed to maximize all available wheel travel for a smoother ride when the "Going Gets Tough"!

• Built to handle the extreme forces with more Off-Road performance in mind.
• Monotube Design, 46mm Pistons, Nitro-Coated Rods and Heavy Duty Zinc Coating
• Improved Handling & Stability—On or Off-Road
• Legendary Eibach Ride Quality
• Easy—Direct Replacement Installation

Ride Height:
Front Ride Height Adjustable: + 0 - 2.5" (when using factory springs)
Rear can accommodate: + 1.5" of lift

PRO-TRUCK REAR LIFT-BLOCK | +1.0"

Eibach PRO-TRUCK Rear Lift Blocks are engineered for additional ground clearance while also helping distribute the weight of your cargo and improve towing performance. Our 1” Rear Lift Blocks can be paired with our rear PRO-TRUCK Sport shocks which accommodate up to 1.5” (depending on application).

• 1" Billet aluminum black anodized blocks
• Includes u bolts and hardware
• Zinc coated hardware to prevent rust
• Sold as a pair
• Made in the USA

Ride Height:
Rear: +1.0"