Eibach - 2007-2015 Toyota Tundra

PRO-TRUCK-LIFT Coilover 2.0 | Front Coilovers

Available for the 2007-2015 Toyota Tundra, PRO-TRUCK COILOVER 2.0's were developed utilizing our extended-travel monotube design and variable force valving, Eibach PRO-TRUCK COILOVER 2.0 delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles.

• Utilizes ERO springs manufactured using race winning off-road spring technology
• Adjustable ride height allows adjustment of up to 3.0" on the Tundra (depending on sub-model)
• Pre-assembled for direct bolt-on installation, out of the box height is set to match the rear height
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Ride Height:
Front: +0-3.0" (depending on sub-model)

Included

• 2 - Front coilover threaded body shocks
• 2 - Front silver Eibach Race Springs
• 2 - Top mount spring seats
• 2 - Threaded perches
• 1 - 6mm adjustment tool
• All mounting hardware

PRO-TRUCK-LIFT Stage 1 | Performance Lift System

Built upon decades of off-road racing victory, the Eibach PRO-TRUCK-LIFT combines a series of PRO-LIFT-KIT springs and PRO-TRUCK Sport shocks to create a perfectly tuned suspension system engineered for both, on and off-road performance. Each PRO-TRUCK-LIFT is designed and tested to deliver maximum ride height without compromising the integrity of factory bushings, ball joints and other components.

With the same spring technology found in our ERO off-road race springs, the block resistant PRO-LIFT-KIT springs can be taken to the limit mile after mile ensuring consistent performance and ride height. Matched with our heavy duty PRO-TRUCK Sport shock system, this combination is capable of handling anything in its path. Precision shock valving allows compliance over large obstacles and control through rough terrain while also improving on road comfort and performance.

Ride Height:
Front: + 2.0" Rear: + 0-1.5"

Included

• 2 - Front Eibach lift springs
• 2 - Front Eibach sport shocks
• 2 - Rear Eibach sport shocks

PRO-LIFT-KIT

Eibach PRO-LIFT-KIT springs are designed to provide a suspension lift for your Tundra without the use of coilover systems or spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.

Each PRO-LIFT-KIT is engineered and manufactured using the same technology found in our championship winning ERO Off-road race springs and carefully tested to provide unparalleled ride quality and off-road capability.

Ride Height:
Front: + 2.0

Note: PRO-LIFT-KIT Springs must be used with Eibach PRO-TRUCK Sport shocks.

PRO-TRUCK Sport | Performance Sport Shocks

Eibach PRO-TRUCK Sport shocks are built to tackle any road. For the 2007-15 Tundra we offer front ride height adjustable sport shocks with a +0-2.0" lift (when using OE springs) and rear shocks that accommodate up to a +1.5" lift. PRO-TRUCK Sport shocks are designed to maximize all available wheel travel for a smoother ride when the "Going Gets Tough"!

• Built to handle the extreme forces with more Off-Road performance in mind.
• Monotube Design, 46mm Pistons, Nitro-Coated Rods and Heavy Duty Zinc Coating
• Improved Handling & Stability—On or Off-Road
• Legendary Eibach Ride Quality
• Easy—Direct Replacement Installation

Ride Height:
Front: +0 - 2.0 " (when using OE springs)
Rear can accommodate up to: +1.5"

Note: PRO-LIFT-KIT Springs must be used with Eibach PRO-TRUCK Sport shocks.

PRO-TRUCK Rear Lift Block | +1.0"

• 1" Billet aluminum black anodized blocks
• Includes u bolts and hardware
• Zinc coated hardware to prevent rust
• Sold as a pair
• Made in the USA

Ride Height:
Rear: +1.0"