All fields are optional
Select Moto

Eibach - 2015-2021 Dodge Challenger

Product Releases - 2015-2021 Dodge Challenger

PRO-KIT

The one and only "Red PRO-KIT". Our Dodge Challenger V8 PRO-KIT utilizes Eibach progressive spring winding technology to deliver enhanced performance and control without compromising ride comfort. By lowering the Center of Gravity (CoG) the PRO-KIT increases steering response and improves vehicle dynamics for a sportier, more balanced feel. Additionally, the reduction in fender gap and ground clearance also contributes to an enhanced aesthetic.

Note: Ride height varies by application, see table below.


DRAG-LAUNCH-KIT

The Dodge Demon has become a drag strip legend, setting a record 9.65 second 1/4 mile time from the factory and producing an unheard of 1.8 g's of acceleration. Our Engineers developed and tested a new spring system for the Mopar line-up that share the same 1/4 mile smashing characteristics as the Demon. The results—our new Eibach DRAG-LAUNCH Kit.

The DRAG-LAUNCH Kit is optimized for traction by taking weight transfer into account and providing maximum grip at launch. This means increased torque control, reduced wheel hop, faster 60ft and lower ET\’s.

The DRAG-LAUNCH Kit is made of the same high-quality materials as our PRO-KIT and Motorsport springs, precision wound hi-tensile steel alloy, cold-formed, tempered and shot-peened for long lasting performance and durability.

  • More consistent load transfer during launches
  • Increased control and reduced wheel hop
  • Made by Eibach in the USA

Note: The DRAG-LAUNCH Kit is developed for drag strip performance and is not designed to lower the vehicle. Heights may vary by make, model and accessories.


ANTI-ROLL-KIT

Complete your suspension upgrade with an Eibach ANTI-ROLL-KIT. Our sway bars allow critical fine-tuning of your Challengers handling characteristics by reducing body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.

Manufactured from cold-formed steel alloy for precision performance and finished with a long lasting red powder coat finish, the ANTI-ROLL-KIT comes complete with all mounting hardware.

Ride Height:
Front: 35 mm Tubular 2 way-Adjustable
Rear: 25 mm Tubular 2 way-Adjustable


ADJUSTABLE END LINKS

Enhance your Challengers handling performance with our fully adjustable Eibach END-LINK Kit. These end links help improve handling performance and provide a more stable ride by eliminating deflection of factory end-link bushings. Eibach end-links are sold in pairs and feature easy to adjust bodies and heavy-duty rod ends

  • Adjustable length for optimized stabilizer bar angle
  • Developed and tested for street performance
  • Heavy-Duty applications include Aurora ® rod ends
  • Hex ends and knurled body for easy adjustment
  • Systems sold in pairs
  • Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance

PRO-SPACERS

  • Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
  • All applications tested in rigid durability and fatigue test
  • Made from high-tensile-strength aluminum alloy
  • High grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
  • Significant weight advantage compared to wheel-spacers made from steel
  • Available in 25- and 30-mm width
  • Sold in pairs

PRO-ALIGNMENT

  • The perfect solution to correct excessive negative camber/caster and prevent uneven tire wear
  • Wider range of camber adjustment suitable for street or track tuning
  • Compatible with all lowered suspensions
  • Sold in pairs

Adjustment:
Camber +/- 2.0, Caster +/-1.5 degrees of adjustment


Before & After

Before
After

Dodge Challenger Scat Pack

Product Part # Front Rear MSRP Cart
ANTI-ROLL-KIT (Front and Rear Sway Bars) E40-27-008-01-11
2015 to 2021
DODGE
Challenger
Scat Pack
Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
35mm
25mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
$491.00
DRAG-LAUNCH Kit (Performance Springs) E32-27-004-02-22
2015 to 2021
DODGE
Challenger
Scat Pack
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
n/a
n/a
Note: Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
$329.00
FRONT ANTI-ROLL Kit (Front Sway Bar Only) 2895.310
2015 to 2021
DODGE
Challenger
Scat Pack
Front Sway Bar is Tubular and 2 Way-Adjustable.
35mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable.
$278.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2015 to 2021
DODGE
Challenger
Scat Pack
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Bushing Kit 5.66050K
2015 to 2021
DODGE
Challenger
Scat Pack
Rear +/-1.5 degrees of camber adjustment.
Note: Rear +/-1.5 degrees of camber adjustment.
$95.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-27-004-01-22
2015 to 2021
DODGE
Challenger
Scat Pack
Tested with factory dampers.
0.8"
1.3"
Note: Tested with factory dampers.
$321.00
PRO-PLUS Kit (Pro-Kit Springs & Sway Bars) E43-27-008-01-22
2015 to 2021
DODGE
Challenger
Scat Pack
Front Sway Bar is Tubular and 2 Way-Adjustable/
0.8 in
1.3 in
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/
$771.00
PRO-SPACER Kit (25mm Pair) S90-4-25-030
2015 to 2021
DODGE
Challenger
Scat Pack
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$145.00
PRO-SPACER Kit (30mm Pair) S90-4-30-017
2015 to 2021
DODGE
Challenger
Scat Pack
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$158.00
REAR ANTI-ROLL Kit (Rear Sway Bar Only) E40-27-008-01-01
2015 to 2021
DODGE
Challenger
Scat Pack
Rear Sway Bar is Tubular and 2 Way-Adjustable.
25mm
Note: Rear Sway Bar is Tubular and 2 Way-Adjustable.
$241.00

Dodge Challenger R/T Scat Pack Widebody

Product Part # Front Rear MSRP Cart
DRAG-LAUNCH Kit (Performance Springs) E32-27-004-02-22
2019 to 2021
DODGE
Challenger
R/T Scat Pack Widebody
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
n/a
n/a
Note: Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
$329.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2019 to 2021
DODGE
Challenger
R/T Scat Pack Widebody
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Bushing Kit 5.66050K
2019 to 2021
DODGE
Challenger
R/T Scat Pack Widebody
Rear +/-1.5 degrees of camber adjustment.
Note: Rear +/-1.5 degrees of camber adjustment.
$95.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-27-004-01-22
2019 to 2021
DODGE
Challenger
R/T Scat Pack Widebody
Tested with factory dampers.
1.1"
1.5"
Note: Tested with factory dampers.
$321.00
PRO-SPACER Kit (25mm Pair) S90-4-25-030
2019 to 2021
DODGE
Challenger
R/T Scat Pack Widebody
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$145.00
PRO-SPACER Kit (30mm Pair) S90-4-30-017
2019 to 2021
DODGE
Challenger
R/T Scat Pack Widebody
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$158.00

Dodge Challenger SRT 392

Product Part # Front Rear MSRP Cart
ANTI-ROLL-KIT (Front and Rear Sway Bars) E40-27-008-01-11
2015 to 2021
DODGE
Challenger
SRT 392
Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
35mm
25mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
$491.00
DRAG-LAUNCH Kit (Performance Springs) E32-27-004-02-22
2015 to 2021
DODGE
Challenger
SRT 392
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
n/a
n/a
Note: Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
$329.00
FRONT ANTI-ROLL Kit (Front Sway Bar Only) 2895.310
2015 to 2021
DODGE
Challenger
SRT 392
Front Sway Bar is Tubular and 2 Way-Adjustable.
35mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable.
$278.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2015 to 2021
DODGE
Challenger
SRT 392
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Bushing Kit 5.66050K
2015 to 2021
DODGE
Challenger
SRT 392
Rear +/-1.5 degrees of camber adjustment.
Note: Rear +/-1.5 degrees of camber adjustment.
$95.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-27-004-01-22
2015 to 2021
DODGE
Challenger
SRT 392
Tested with factory dampers.
0.6"
1.1"
Note: Tested with factory dampers.
$321.00
PRO-PLUS Kit (Pro-Kit Springs & Sway Bars) E43-27-008-01-22
2015 to 2021
DODGE
Challenger
SRT 392
Front Sway Bar is Tubular and 2 Way-Adjustable/
0.6 in
1.0 in
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/
$771.00
PRO-SPACER Kit (25mm Pair) S90-4-25-030
2015 to 2021
DODGE
Challenger
SRT 392
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$145.00
PRO-SPACER Kit (30mm Pair) S90-4-30-017
2015 to 2021
DODGE
Challenger
SRT 392
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$158.00
REAR ANTI-ROLL Kit (Rear Sway Bar Only) E40-27-008-01-01
2015 to 2021
DODGE
Challenger
SRT 392
Rear Sway Bar is Tubular and 2 Way-Adjustable.
25mm
Note: Rear Sway Bar is Tubular and 2 Way-Adjustable.
$241.00

Dodge Challenger SRT Hellcat

Product Part # Front Rear MSRP Cart
ANTI-ROLL-KIT (Front and Rear Sway Bars) E40-27-008-01-11
2015 to 2021
DODGE
Challenger
SRT Hellcat
Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
35mm
25mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
$491.00
DRAG-LAUNCH Kit (Performance Springs) E32-27-004-02-22
2015 to 2021
DODGE
Challenger
SRT Hellcat
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
n/a
n/a
Note: Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
$329.00
FRONT ANTI-ROLL Kit (Front Sway Bar Only) 2895.310
2015 to 2021
DODGE
Challenger
SRT Hellcat
Front Sway Bar is Tubular and 2 Way-Adjustable.
35mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable.
$278.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2015 to 2021
DODGE
Challenger
SRT Hellcat
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2015 to 2021
DODGE
Charger
SRT Hellcat
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Bushing Kit 5.66050K
2015 to 2021
DODGE
Challenger
SRT Hellcat
Rear +/-1.5 degrees of camber adjustment.
Note: Rear +/-1.5 degrees of camber adjustment.
$95.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-27-004-01-22
2015 to 2021
DODGE
Challenger
SRT Hellcat
Tested with factory dampers.
0.9"
0.9"
Note: Tested with factory dampers.
$321.00
PRO-PLUS Kit (Pro-Kit Springs & Sway Bars) E43-27-008-01-22
2015 to 2021
DODGE
Challenger
SRT Hellcat
Front Sway Bar is Tubular and 2 Way-Adjustable/
1.1 in
1.2 in
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/
$771.00
PRO-SPACER Kit (25mm Pair) S90-4-25-030
2015 to 2021
DODGE
Challenger
SRT Hellcat
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$145.00
PRO-SPACER Kit (30mm Pair) S90-4-30-017
2015 to 2021
DODGE
Challenger
SRT Hellcat
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$158.00
REAR ANTI-ROLL Kit (Rear Sway Bar Only) E40-27-008-01-01
2015 to 2021
DODGE
Challenger
SRT Hellcat
Rear Sway Bar is Tubular and 2 Way-Adjustable.
25mm
Note: Rear Sway Bar is Tubular and 2 Way-Adjustable.
$241.00

Dodge Challenger SRT Hellcat Widebody

Product Part # Front Rear MSRP Cart
DRAG-LAUNCH Kit (Performance Springs) E32-27-004-02-22
2019 to 2021
DODGE
Challenger
SRT Hellcat Widebody
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
n/a
n/a
Note: Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
$329.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2019 to 2021
DODGE
Challenger
SRT Hellcat Widebody
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Bushing Kit 5.66050K
2019 to 2021
DODGE
Challenger
SRT Hellcat Widebody
Rear +/-1.5 degrees of camber adjustment.
Note: Rear +/-1.5 degrees of camber adjustment.
$95.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-27-004-01-22
2019 to 2021
DODGE
Challenger
SRT Hellcat Widebody
Tested with factory dampers.
1.2"
1.7"
Note: Tested with factory dampers.
$321.00
PRO-SPACER Kit (25mm Pair) S90-4-25-030
2019 to 2021
DODGE
Challenger
SRT Hellcat Widebody
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$145.00
PRO-SPACER Kit (30mm Pair) S90-4-30-017
2019 to 2021
DODGE
Challenger
SRT Hellcat Widebody
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$158.00

Dodge Challenger, SRT Hellcat Redeye

Product Part # Front Rear MSRP Cart
ANTI-ROLL-KIT (Front and Rear Sway Bars) E40-27-008-01-11
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
35mm
25mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/ Rear Sway Bar is Tubular and 2 Way-Adjustable.
$491.00
DRAG-LAUNCH Kit (Performance Springs) E32-27-004-02-22
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
n/a
n/a
Note: Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
$329.00
FRONT ANTI-ROLL Kit (Front Sway Bar Only) 2895.310
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Front Sway Bar is Tubular and 2 Way-Adjustable.
35mm
Note: Front Sway Bar is Tubular and 2 Way-Adjustable.
$278.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Bushing Kit 5.66050K
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Rear +/-1.5 degrees of camber adjustment.
Note: Rear +/-1.5 degrees of camber adjustment.
$95.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-27-004-01-22
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Tested with factory dampers.
1.1"
1.0"
Note: Tested with factory dampers.
$321.00
PRO-PLUS Kit (Pro-Kit Springs & Sway Bars) E43-27-008-01-22
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Front Sway Bar is Tubular and 2 Way-Adjustable/
1.1 in
1.0 in
Note: Front Sway Bar is Tubular and 2 Way-Adjustable/
$771.00
PRO-SPACER Kit (25mm Pair) S90-4-25-030
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$145.00
PRO-SPACER Kit (30mm Pair) S90-4-30-017
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$158.00
REAR ANTI-ROLL Kit (Rear Sway Bar Only) E40-27-008-01-01
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye
Rear Sway Bar is Tubular and 2 Way-Adjustable.
25mm
Note: Rear Sway Bar is Tubular and 2 Way-Adjustable.
$241.00

Dodge Challenger SRT Hellcat Redeye Widebody

Product Part # Front Rear MSRP Cart
DRAG-LAUNCH Kit (Performance Springs) E32-27-004-02-22
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye Widebody
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
n/a
n/a
Note: Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
$329.00
PRO-ALIGNMENT Camber Arm Kit 5.66045k
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye Widebody
Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.0 Caster +/-1.5 degrees of adjustment.
$474.00
PRO-ALIGNMENT Camber Bushing Kit 5.66050K
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye Widebody
Rear +/-1.5 degrees of camber adjustment.
Note: Rear +/-1.5 degrees of camber adjustment.
$95.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-27-004-01-22
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye Widebody
Tested with factory dampers.
1"
0.9"
Note: Tested with factory dampers.
$321.00
PRO-SPACER Kit (25mm Pair) S90-4-25-030
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye Widebody
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$145.00
PRO-SPACER Kit (30mm Pair) S90-4-30-017
2019 to 2021
DODGE
Challenger
SRT Hellcat Redeye Widebody
Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Original studs must be changed. Longer studs are included. When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
$158.00

Select a Sub-Category

View  
No Image Available
No Image Available
No Image Available
No Image Available
No Image Available
No Image Available
No Image Available
No Image Available
No Image Available
Loading Page Loading Your Parts