Select Application
All fields are optional
Select Moto
- Home »
- Catalog »
- Product Releases »
- 2017-2021 Infiniti Q60 3.0L
Eibach - 2017-2021 Infiniti Q60 3.0L
PRO-KIT
Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals to deliver an increase in steering response and improved vehicle dynamics for a sportier, more balanced feel without ever compromising safety or ride quality. By using our proprietary spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level. Additionally, the reduction in fender gap and ground clearance also contributes to an enhanced aesthetic.
- Performance handling and improved dynamics
- Lower center of gravity
- Stop quicker and corner faster
- Reduced fender gap for enhanced aesthetics
- Million-Mile Warranty
Ride Height:
Base: Front: - 0.6" Rear: - 1.0"
Red Sport: Front: - 0.3" Rear: - 1.1"
PRO-SPACER
- Available in 15mm, 20mm and 25mm's
- Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
- All applications tested in rigid durability and fatigue test
- Made from high-tensile-strength aluminum alloy
- High grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
- Significant weight advantage compared to wheel-spacers made from steel
- Sold in pairs
PRO-ALIGNMENT
- +/- 1° caster and +/-2.5° camber adjustment
- Direct OE front upper control arm replacement
- Maintenance OE ride quality and minimizes tire wear
- Features Jounce spacers to eliminate NVH
- Fully compatible with our PRO-KIT Lowering Springs
- Sold in pairs
Before & After
Before
After
Base Model Products
| Product | Part # | Front | Rear | MSRP | Cart | |
|
PRO-ALIGNMENT Camber Arm Kit | 5.72130K | 2017 to 2021
INFINITI
Q60
Base Coupe 3.0L RWD
Camber/Caster Control Arm - Front Camber +/-2.5 Caster +/-1.0 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.5 Caster +/-1.0 degrees of adjustment. |
$553.00 | ||
|
PRO-KIT Performance Springs (Set of 4 Springs) | E10-44-003-01-22 | 2017 to 2021
INFINITI
Q60
Base Coupe 3.0L RWD
Front Camber Kit part# 5.72130K must be used to get vehicle back to factory alignment. Tested with factory dampers.
0.6 in
1.0 in
Note: Front Camber Kit part# 5.72130K must be used to get vehicle back to factory alignment. Tested with factory dampers. |
$357.00 | ||
|
PRO-SPACER Kit (15mm Pair) | S90-4-15-001 | 2017 to 2021
INFINITI
Q60
Base Coupe 3.0L RWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels! |
$125.00 | ||
|
PRO-SPACER Kit (20mm Pair) | S90-4-20-003 | 2017 to 2021
INFINITI
Q60
Base Coupe 3.0L RWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels! |
$132.00 | ||
|
PRO-SPACER Kit (25mm Pair) | S90-4-25-019 | 2017 to 2021
INFINITI
Q60
Base Coupe 3.0L RWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels! |
$137.00 |
Red Sport Products
| Product | Part # | Front | Rear | MSRP | Cart | |
|
PRO-ALIGNMENT Camber Arm Kit | 5.72130K | 2017 to 2021
INFINITI
Q60
Red Sport Coupe 3.0L RWD
Camber/Caster Control Arm - Front Camber +/-2.5 Caster +/-1.0 degrees of adjustment.
Note: Camber/Caster Control Arm - Front Camber +/-2.5 Caster +/-1.0 degrees of adjustment. |
$553.00 | ||
|
PRO-KIT Performance Springs (Set of 4 Springs) | E10-44-003-01-22 | 2017 to 2021
INFINITI
Q60
Red Sport Coupe 3.0L RWD
Front Camber Kit part# 5.72130K must be used to get vehicle back to factory alignment. Tested with factory dampers.
0.3 in
1.1 in
Note: Front Camber Kit part# 5.72130K must be used to get vehicle back to factory alignment. Tested with factory dampers. |
$357.00 | ||
|
PRO-SPACER Kit (15mm Pair) | S90-4-15-001 | 2017 to 2021
INFINITI
Q60
Red Sport Coupe 3.0L RWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels! |
$125.00 | ||
|
PRO-SPACER Kit (20mm Pair) | S90-4-20-003 | 2017 to 2021
INFINITI
Q60
Red Sport Coupe 3.0L RWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels! |
$132.00 | ||
|
PRO-SPACER Kit (25mm Pair) | S90-4-25-019 | 2017 to 2021
INFINITI
Q60
Red Sport Coupe 3.0L RWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels!
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm. Do not use with vehicles equipped with steel wheels! |
$137.00 |
