Eibach - 2015-2020 Ford F-150 V6 2.7L / 3.5L

PRO-TRUCK-LIFT Stage 2

The PRO-TRUCK-LIFT STAGE 2 features the ability to fine tune with threaded height adjustment and shares the same rear performance shocks as our STAGE 1 system. The PRO-TRUCK-COILOVER 2.0's utilize our extended travel monotube design and variable force valving which delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our interchangeable championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles.

• Utilizes our ERO Championship proven Off-Road racing springs
• Front coilovers allow adjustment of up to +2.75"
• Pre-assembled for direct bolt-on installation, out of the box lift height is set level w/ factory rear
• Rear performance shocks can accommodate +1.5" of lift
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Ride Height:
Front: +0 - 2.75" Rear: Can accommodate up to +1.5" of lift

Included

• 2 - Front Eibach linear race springs
• 2 - Front coilover threaded body shocks
• 2 - Rear Eibach sport shocks
• 2 - Billet aluminum top mount
• 2 - Polyurethane elastomer bump stops
• 1 - 6mm adjustment spanner wrench
• All Required Mounting Hardware

PRO-TRUCK-LIFT STAGE 1

The PRO-TRUCK-LIFT STAGE 1 System combines a series of front PRO-LIFT-KIT springs, front adjustable PRO-TRUCK Sport shocks and rear performance shocks that can accommodate up to a +1.5" lift to create a perfectly tuned suspension system engineered for both, on and off-road performance. Each system is designed and tested to deliver maximum ride height without compromising the integrity of factory bushings, ball joints and other components on your F-150 V6 3.5L.

• Utilizes front PRO-LIFT-KIT Springs manufactured using race winning off-road spring technology
• Monotube design, 46mm pistons, Nitro coated rod and heavy-duty zinc coating
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide balanced ride quality, control and off-road capability
• Made by Eibach in the USA

Ride Height:
Front: +2.75" Rear: Can accommodate up to +1.5" of lift

Included

• 2 - Front Eibach lift springs
• 2 - Front Eibach sport shocks
• 2 - Rear Eibach sport shocks

Note: Available for the V6 3.5L model only.

PRO-LIFT-KIT

Front Eibach PRO-LIFT-KIT Springs are designed to provide a suspension lift for your F-150 without the use of coilover systems or spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.

Each PRO-LIFT-KIT is engineered and manufactured using the same technology found in our championship winning ERO Off-road race springs and carefully tested to provide unparalleled ride quality and off-road capability. Made by Eibach in the USA

Ride Height
Front: +2.75"

Note: Available for the V6 3.5L model only. PRO-LIFT-KIT Springs must be used with Eibach PRO-TRUCK Sport shocks.

PRO-TRUCK Sport

Eibach PRO-TRUCK Sport shocks are built to tackle any road. For the F-150 we offer front ride height adjustable shocks that lift up to +2.50" (when using factory springs) and rear shocks that accommodate up to a +1.5" lift. PRO-TRUCK Sport shocks are designed to maximize all available wheel travel for a smoother ride.

• Built to handle the extreme forces with more Off-Road performance in mind.
• Monotube Design, 46mm Pistons, Nitro-Coated Rods and Heavy Duty Zinc Coating
• Improved Handling & Stability—On or Off-Road
• Legendary Eibach Ride Quality
• Easy—Direct Replacement Installation
• Made by Eibach in the USA

Ride Height
Front Ride Height Adjustable: + 0 - 2.50" (when using factory springs)
Rear can accommodate: + 1.5"

PRO-TRUCK REAR LIFT-BLOCK

• 1" Billet aluminum black anodized blocks
• Includes u bolts and hardware
• Zinc coated hardware to prevent rust
• Sold as a pair
• Made in the USA

Ride Height
Rear: +1.0"

PRO-ALIGNMENT

• The perfect solution to correct excessive negative camber/caster and prevent uneven tire wear
• Wider range of camber adjustment suitable for street or off-road
• Compatible with all Eibach suspensions
• Sold in pairs

Adjustment
Front Camber +/-1.0 degrees Caster +/-1.5 degrees of adjustment