All fields are optional
Select Moto

Eibach - 2018-2021 Toyota Camry 4Cyl / V6

Product Releases - 2018-2021 Toyota Camry 4Cyl / V6

PRO-KIT

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals to deliver an increase in steering response and improved vehicle dynamics for a sportier, more balanced feel without ever compromising safety or ride quality. By using our proprietary spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level. Additionally, the reduction in fender gap and ground clearance also contributes to an enhanced aesthetic.

  • Performance handling and improved dynamics
  • Lower center of gravity
  • Stop Quicker and corner faster
  • Reduced fender gap for enhanced aesthetics
  • Million-Mile Warranty

Ride Height 4Cyl:
Front: -1.2" Rear: -1.2"

Ride Height V6:
Front: -1.3" Rear: -1.3"

2018-2021 Toyota Camry Lowering Springs

PRO-SPACERS

  • Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
  • All applications tested in rigid durability and fatigue test
  • Made from high-tensile-strength aluminum alloy
  • High grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
  • Significant weight advantage compared to wheel-spacers made from steel
  • Sold in pairs
2018-2021 Toyota Camry Wheel Spacers

PRO-ALIGNMENT

  • The perfect solution to correct excessive negative camber and prevent uneven tire wear
  • Wider range of camber adjustment suitable for street or track tuning
  • Compatible with all lowered suspensions
  • Sold in pairs

Adjustment
Front Camber Bolts 17mm. Camber +/-1.75 degrees of adjustment.

2018-2021 Toyota Camry Front Camber Bolts

Before & After

Before
After

4Cyl Products

Product Part # Front Rear MSRP Cart
PRO-ALIGNMENT Camber Bolt Kit 5.81290K
2018 to 2021
TOYOTA
Camry
4 Cyl. FWD
Camber Bolts 17mm. Camber +/-1.75 degrees of adjustment.
Note: Camber Bolts 17mm. Camber +/-1.75 degrees of adjustment.
$28.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-82-082-01-22
2018 to 2021
TOYOTA
Camry
4 Cyl. FWD
Tested with factory dampers.
1.2 in
1.2 in
Note: Tested with factory dampers.
$275.99
PRO-SPACER Kit (15mm Pair) S90-6-15-034
2018 to 2021
TOYOTA
Camry
4 Cyl. FWD
Original studs must be changed. Longer studs are included.
Note: Original studs must be changed. Longer studs are included.
$103.00
PRO-SPACER Kit (20mm Pair) S90-4-20-013
2018 to 2021
TOYOTA
Camry
4 Cyl. FWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
$120.00
PRO-SPACER Kit (25mm Pair) S90-4-25-029
2018 to 2021
TOYOTA
Camry
4 Cyl. FWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
$124.00
PRO-SPACER Kit (30mm Pair) S90-4-30-016
2018 to 2021
TOYOTA
Camry
4 Cyl. FWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
$133.00

V6 Products

Product Part # Front Rear MSRP Cart
PRO-ALIGNMENT Camber Bolt Kit 5.81290K
2018 to 2021
TOYOTA
Camry
V6 3.5L FWD
Camber Bolts 17mm. Camber +/-1.75 degrees of adjustment.
Note: Camber Bolts 17mm. Camber +/-1.75 degrees of adjustment.
$28.00
PRO-KIT Performance Springs (Set of 4 Springs) E10-82-082-02-22
2018 to 2021
TOYOTA
Camry
V6 3.5L FWD
Tested with factory dampers.
1.3 in
1.3 in
Note: Tested with factory dampers.
$275.99
PRO-SPACER Kit (15mm Pair) S90-6-15-034
2018 to 2021
TOYOTA
Camry
V6 3.5L FWD
Original studs must be changed. Longer studs are included.
Note: Original studs must be changed. Longer studs are included.
$103.00
PRO-SPACER Kit (20mm Pair) S90-4-20-013
2018 to 2021
TOYOTA
Camry
V6 3.5L FWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
$120.00
PRO-SPACER Kit (25mm Pair) S90-4-25-029
2018 to 2021
TOYOTA
Camry
V6 3.5L FWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
$124.00
PRO-SPACER Kit (30mm Pair) S90-4-30-016
2018 to 2021
TOYOTA
Camry
V6 3.5L FWD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
$133.00

Select a Sub-Category

View  
No Image Available
No Image Available
V6
Loading Page Loading Your Parts