Eibach - 2015-2021 Chevrolet Colorado 2WD/4WD

PRO-TRUCK-LIFT Stage 1

Built upon decades of off-road racing victory, the Eibach PRO-TRUCK-LIFT STAGE 1 System combines a series of front PRO-LIFT-KIT springs, front adjustable PRO-TRUCK Sport shocks and rear performance shocks that can accommodate up to a +1.5" lift to create a perfectly tuned suspension system engineered for both, on and off-road performance. Each system is designed and tested to deliver maximum ride height without compromising the integrity of factory bushings, ball joints and other components on your Colorado.

With the same spring technology found in our ERO off-road race springs, the block resistant PRO-LIFT-KIT Springs can be taken to the limit mile after mile ensuring consistent performance and ride height. Matched with our precision valved PRO-TRUCK Sport shocks, this combination allows full control through rough terrain while improving on road comfort and performance.

Ride Height:
Front: +2.0-3.0" Rear: Can accommodate up to +1.5" of lift

• 2 - Front Eibach sport shocks
• 2 - Rear Eibach sport shocks
• 2 - Front Eibach lift springs

PRO-TRUCK-LIFT Stage 2

The PRO-TRUCK-LIFT STAGE 2 System shares the same rear performance shocks as our STAGE 1 system with an upgrade in adjust ability up front. The front 2.0 coilovers were developed utilizing our extended-travel monotube design and variable force valving that delivers control during on-road transit and compliance for maximum traction on the trails. Designed for use with our championship winning ERO Off-Road Race Springs, this system allows for various combinations to fine tune ride height and load capacity from fully loaded crawlers to factory weight vehicles

• Utilizes ERO springs manufactured using race winning off-road spring technology
• Front coilovers allow adjustment of up to +3.0" on the Colorado
• Pre-assembled for direct bolt-on installation, out of the box height is set to match the rear height
• Rear performance shocks can accommodate +1.5 of lift
• Designed to work with factory control arms for an increase in height without accelerated wear to ball joints and bushings
• Developed specifically to provide a balanced ride quality on and off-road
• Made by Eibach in the USA

Ride Height:
Front: +1.0 - 3.0" Rear: Can accommodate up to +1.5" of lift

• 2 - Billet aluminum top mount
• 2 - Polyurethane elastomer bump stops
• 2 - Front coilover threaded body shocks
• 2 - Front Eibach linear race springs
• 2 - Rear Eibach sport shocks
• 1 - 6mm adjustment spanner wrench
• All Required Mounting Hardware

PRO-LIFT-KIT

Front Eibach PRO-LIFT-KIT Springs are designed to provide a suspension lift for your Colorado without the use of coilover systems or spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.

Each PRO-LIFT-KIT is engineered and manufactured using the same technology found in our championship winning ERO Off-road race springs and carefully tested to provide unparalleled ride quality and off-road capability.

Ride Height:
Front: +2.0" (when using factory shocks)

Note: PRO-TRUCK lift springs must be used with Eibach PRO-TRUCK Sport shocks

PRO-TRUCK Sport Shocks

Eibach PRO-TRUCK Sport shocks are built to tackle any road. For the Colorado we offer front ride height adjustable shocks that lift up to +2.0" (when using factory springs) and rear shocks that accommodate up to a +1.5" lift. PRO-TRUCK Sport shocks are designed to maximize all available wheel travel for a smoother ride when the "Going Gets Tough"!

• Built to handle the extreme forces with more Off-Road performance in mind.
• Monotube Design, 46mm Pistons, Nitro-Coated Rods and Heavy Duty Zinc Coating
• Improved Handling & Stability—On or Off-Road
• Legendary Eibach Ride Quality
• Easy—Direct Replacement Installation

Ride Height
Front Ride Height Adjustable: + 0 - 2.0" (when using factory springs)
Rear can accommodate: + 1.5"

PRO-TRUCK Lift Block

• 1" Billet aluminum black anodized blocks
• Includes u bolts and hardware
• Zinc coated hardware to prevent rust
• Sold as a pair
• Made in the USA

Ride Height
Rear: +1.0"