All fields are optional
Select Moto

Eibach - 2019 Honda Talon R

Product Releases - 2019 Honda Talon R

PRO-UTV Spring system

Each PRO-UTV System deliver the maximum performance for any terrain using our ERO (Eibach Racing Off-Road) springs. The choice of Off-Road Champions from SCORE to WRC, these springs are engineered to withstand the extreme off-road challenges with legendary performance, quality and reliability.

Stage 2 – Perfect for the weekend warrior. This system delivers the confidence and control you need to keep the hammer down and lead the pack. Adjustable lockout collars allow fine tuning of the transition point of the dual spring setup—for a smooth ride over rough terrain and the higher additional rate to prevent bottoming in the g-outs. You will immediately notice better turn-in response and stay hooked-up to power out of the turns.

Stage 3 – Engineered vehicles with higher loads and additional passengers. This system offers a slightly more aggressive spring rate to maintain the balance you need at the limit. Adjustable lockout collars allow fine tuning of the transition point of the dual spring setup—for a plush ride over rough terrain and the higher additional rate to prevent bottoming. Perfect for vehicles loaded with spares, tools and passengers.

All PRO-UTV Systems Include Springs, Sliders, Stop Rings and Setup instructions for easy bolt-on installation Engineered and Tested FOR Drivers--BY Drivers for Maximum Performance on Any Terrain Race Proven Durability, Quality and Repeatability You Can Rely On Made By Eibach in the USA Lifetime Warranty

2019 Textron Wildcat Suspension Kit

PRO-UTV | Adjustable ANTI-ROLL-KIT

Through development testing of the PRO-UTV Spring System, we found a need to improve roll resistance on the Talon 1000R. Our ANTI-ROLL-KIT combined with the PRO-UTV Spring System delivers a perfect balance of compliance over whoops and g-out resistance with increased handling dynamics for more stability through the turns. Our ANTI-ROLL-KIT features three points of adjustment for fine tuning to driving preference or additional weight giving you a controlled ride through the desert, dunes or trails.

  • Reduced body roll through increased design stiffness over stock sway bar
  • Engineered to perfectly complement each PRO-UTV Spring system
  • Multi-way adjustable for fine tuning to drivers' preferences
2 inch and 2.5 inch anti-slip spanner wrenches

PRO-UTV | Stabilizer Bar End-Links

Enhance the performance of your Eibach ANTI-ROLL-KIT with our new Eibach Adjustable END-LINK-KIT. Featuring heat treated alloy steel spherical rod ends and a heavy duty aluminum design, developed and tested for increased durability, our adjustable end links allow precise tuning to remove sway bar pre-load for optimal performance and grip.

  • Adjustable end-links for precise tuning
  • Heat treated alloy steel Aurora© spherical rod ends
  • Heavy-duty aluminum design for increased durability
2 inch and 2.5 inch anti-slip spanner wrenches

ANTI-SLIP SPANNER WRENCH

  • Positive engagement, anti-slip grip spanner wrenches
  • Specifically engineered to work with each model UTV shock collar
2 inch and 2.5 inch anti-slip spanner wrenches

Products

Product Part # Front Rear MSRP Cart
PRO-UTV - Stage 2 Performance Spring System (Set of 8 Springs) E85-40-039-02-22
2019 to 2019
HONDA
Talon 1000R
Stage 2 (PERFORMANCE) kit for OE Fox Shocks.
Note: Stage 2 (PERFORMANCE) kit for OE Fox Shocks.
$998.89
PRO-UTV - Stage 3 Performance Spring System (Set of 8 Springs) E85-40-039-03-22
2019 to 2019
HONDA
Talon 1000R
Stage 3 (EXTRA LOAD) kit for OE Fox Shocks.
Note: Stage 3 (EXTRA LOAD) kit for OE Fox Shocks.
$998.89
PRO-UTV - Adjustable Rear Anti-Roll Bar (Rear Sway Bar Only) E40-40-039-01-01
2019 to 2019
HONDA
Talon 1000R
Rear Sway Bar is Tubular and 3 Way-Adjustable.
25mm
Note: Rear Sway Bar is Tubular and 3 Way-Adjustable.
$276.67
PRO-UTV - Rear Adjustable Endlink System AK41-40-039-01-02
2019 to 2019
HONDA
Talon 1000R
Fully Adjustable End Link System for Tuning Sway Bar Preload Replaces Factory End Links.
Note: Fully Adjustable End Link System for Tuning Sway Bar Preload Replaces Factory End Links.
$250.00
PRO-UTV - Spanner Wrench Kit ETXR2.5
2019 to 2019
HONDA
Talon 1000R
FOR FOX 2.5" X-OVER RING
Note: FOR FOX 2.5" X-OVER RING
$16.67
PRO-UTV - Spanner Wrench Kit ETFX2.5
2019 to 2019
HONDA
Talon 1000R
FOR FOX 2.5" COILOVER
Note: FOR FOX 2.5" COILOVER
$16.67

Browse 2019 Honda Talon R Products

Sort
View
 
Items 1-6 of 6
HONDA Talon 1000R
(Front)
(Rear)
Description:
2019 to 2019
HONDA
Talon 1000R
Stage 2 (PERFORMANCE) kit for OE Fox Shocks.
Note: Stage 2 (PERFORMANCE) kit for OE Fox Shocks.
Item #: E85-40-039-02-22
Condition: New
In Stock
Price: $998.89
Qty:

HONDA Talon 1000R
(Front)
(Rear)
Description:
2019 to 2019
HONDA
Talon 1000R
Stage 3 (EXTRA LOAD) kit for OE Fox Shocks.
Note: Stage 3 (EXTRA LOAD) kit for OE Fox Shocks.
Item #: E85-40-039-03-22
Condition: New
In Stock
Price: $998.89
Qty:

HONDA Talon 1000R
(Front)
25mm (Rear)
Description:
2019 to 2019
HONDA
Talon 1000R
Rear Sway Bar is Tubular and 3 Way-Adjustable.
25mm
Note: Rear Sway Bar is Tubular and 3 Way-Adjustable.
Item #: E40-40-039-01-01
Condition: New
In Stock
Price: $276.67
Qty:

HONDA Talon 1000R
(Front)
(Rear)
Description:
2019 to 2019
HONDA
Talon 1000R
Fully Adjustable End Link System for Tuning Sway Bar Preload Replaces Factory End Links.
Note: Fully Adjustable End Link System for Tuning Sway Bar Preload Replaces Factory End Links.
Item #: AK41-40-039-01-02
Condition: New
Limited Supply
This item is not currently in stock but will be available soon!
Please call for due date.
Price: $250.00
Qty:

HONDA Talon 1000R
(Front)
(Rear)
Description:
2019 to 2019
HONDA
Talon 1000R
FOR FOX 2.5" X-OVER RING
Note: FOR FOX 2.5" X-OVER RING
Item #: ETXR2.5
Condition: New
Unique Item
Price: $16.67
Qty: 1

HONDA Talon 1000R
(Front)
(Rear)
Description:
2019 to 2019
HONDA
Talon 1000R
FOR FOX 2.5" COILOVER
Note: FOR FOX 2.5" COILOVER
Item #: ETFX2.5
Condition: New
Unique Item
Price: $16.67
Qty: 1

Items 1-6 of 6
x

EIBACH INSIDER

Subscribe for the latest updates!

Subscribe

* indicates required
Loading Page Loading Your Parts