Swipe left or right on tables below to see more info.

Eibach - CAR | TRUCK | SUV

Select a Sub-Category

View  
No Image Available
No Image Available

CAR | TRUCK | SUV Featured Products

Sort
View
 
Items 6711-6737 of 6737
FORD Mustang 4.6L Convertible S197
(Front)
(Rear)
Description:
2005 to 2010
FORD
Mustang
4.6L Convertible S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang 5.0L Coupe S197
(Front)
(Rear)
Description:
2011 to 2014
FORD
Mustang
5.0L Coupe S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang Shelby GT500 Coupe S197
(Front)
(Rear)
Description:
2011 to 2012
FORD
Mustang
Shelby GT500 Coupe S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang V6 Convertible S197
(Front)
(Rear)
Description:
2011 to 2014
FORD
Mustang
V6 Convertible S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang Shelby GT500 Convertible S197
(Front)
(Rear)
Description:
2013 to 2014
FORD
Mustang
Shelby GT500 Convertible S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang 6 Cyl. Convertible S197
(Front)
(Rear)
Description:
2005 to 2009
FORD
Mustang
6 Cyl. Convertible S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang 4.6L Coupe S197
(Front)
(Rear)
Description:
2005 to 2010
FORD
Mustang
4.6L Coupe S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang Shelby GT500 Convertible S197
(Front)
(Rear)
Description:
2011 to 2011
FORD
Mustang
Shelby GT500 Convertible S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Mustang Shelby GT500 Convertible S197
(Front)
(Rear)
Description:
2007 to 2010
FORD
Mustang
Shelby GT500 Convertible S197
Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Note: Do not use with vehicles equipped with steel wheels! When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!
Item #: S90-4-35-006
Condition: New
In Stock
Price: $233.33
Qty:

FORD Explorer V6 2WD/4WD Excludes Sport
(Front)
(Rear)
Description:
2001 to 2004
FORD
Explorer
V6 2WD/4WD Excludes Sport
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang V8 Coupe FOX
(Front)
(Rear)
Description:
1979 to 1993
FORD
Mustang
V8 Coupe FOX
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang Mach I V8 Coupe SN95
(Front)
(Rear)
Description:
2003 to 2004
FORD
Mustang
Mach I V8 Coupe SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Ranger 2WD/4WD
(Front)
(Rear)
Description:
1998 to 2005
FORD
Ranger
2WD/4WD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang V8 Convertible FOX
(Front)
(Rear)
Description:
1983 to 1993
FORD
Mustang
V8 Convertible FOX
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

MERCURY Capri V8
(Front)
(Rear)
Description:
1979 to 1986
MERCURY
Capri
V8
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Explorer V8 2WD/4WD Excludes Sport
(Front)
(Rear)
Description:
2002 to 2004
FORD
Explorer
V8 2WD/4WD Excludes Sport
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang 6 Cyl. Convertible SN95
(Front)
(Rear)
Description:
1999 to 2004
FORD
Mustang
6 Cyl. Convertible SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang 6 Cyl. Coupe SN95
(Front)
(Rear)
Description:
1994 to 2004
FORD
Mustang
6 Cyl. Coupe SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang SVT Cobra Coupe SN95
(Front)
(Rear)
Description:
1999 to 2001
FORD
Mustang
SVT Cobra Coupe SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Ranger 2WD
(Front)
(Rear)
Description:
1990 to 1997
FORD
Ranger
2WD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang GT Coupe SN95
(Front)
(Rear)
Description:
1994 to 2004
FORD
Mustang
GT Coupe SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang SVT Cobra Convertible SN95
(Front)
(Rear)
Description:
1999 to 2001
FORD
Mustang
SVT Cobra Convertible SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

MERCURY Capri 2.3L
(Front)
(Rear)
Description:
1979 to 1986
MERCURY
Capri
2.3L
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Explorer 2WD
(Front)
(Rear)
Description:
1991 to 1994
FORD
Explorer
2WD
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang 4 & 6 Cyl. Coupe FOX Excludes SVO
(Front)
(Rear)
Description:
1979 to 1993
FORD
Mustang
4 & 6 Cyl. Coupe FOX Excludes SVO
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang GT Convertible SN95
(Front)
(Rear)
Description:
1994 to 2004
FORD
Mustang
GT Convertible SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

FORD Mustang 6 Cyl. Convertible SN95
(Front)
(Rear)
Description:
1994 to 1998
FORD
Mustang
6 Cyl. Convertible SN95
Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Item #: S90-4-45-001
Condition: New
In Stock
Price: $251.11
Qty:

Items 6711-6737 of 6737