30mm Spacer / Bolt Pattern 5x108 / Hub Center 63.3 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Note: 30mm Spacer / Bolt Pattern 5x108 / Hub Center 63.3 Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
We store consumer information on our website. If you continue without changing your settings, we will assume privileges to continue collection data during your visit on our site. Learn more.